Micrometric centering system for compound shafts ТСТ 2401

Transportirovochnyj-kejs

This system allows you to center the compound shafts at a high level, as well as control the kinematics of the mechanisms and carry out their adjustment.
The list of works that can be implemented::

• Vertical and horizontal shafts, centering
• If one or two intermediate shafts are present, centering is possible
• The mechanisms in which the shafts are installed in sliding or rolling bearings are centered.
• The measurement results are entered automatically or manually
• When you receive the centering results, databases are automatically maintained
• Determination of the effect of the “soft paw”
• Based on their design and technical parameters, it is possible to maintain automated databases
• Automatic compensation of temperature expansion, ascending of sliding bearings, deflection of fastening devices
• Possibility to save reports on electronic media, or print to a printer
Steps for performing measurements and adjustments

1.Setting the indicator
Installation of sensors is based on the geometry of the coupling, after the sensor is connected to a measuring device (computer or tablet) using an adapter
2.Entering geometric parameters
Next, we enter the required geometric parameters in the “description of the mechanism” section. The software has a database of mechanisms.
3.Carrying out measurements
To do measure it is necessary for the device to fix the positions at several points. This is 0,3,6,9 hours. The display shows the values of the misalignments.
4.Setting the mechanism
Having obtained the result, we can see how thick the plate is to be laid and how to move the motor horizontally. After completing all the work, it is necessary to repeat the measurements to check the quality of work and, if necessary, to make adjustments.

 

Packaging

Izmeritel'nyj-indikator-so-stepen'yu-tochnosti-do-10-mkm

4-channel convetrter of interface

Izmeritel'nyj-indikator-so-stepen'yu-tochnosti-do-10-mkm-mini

Measuring indicator with a degree of accuracy up to 10 um

Soedinitel'nye-kabeli-mini

Connecting cables

Planshet-mini

The tablet

Ruletka-mini

The tape-measure (3 m.)

Magnitnaya-stojka-indikatora-mini

Magnetic indicator stand

Komplekt-cepej-dlya-fiksacii-stoek-mini

Set of chains for fixing stands

Stojka-krepleniya-indikatora-mini

Indicator Mounting Stand

THE DEVICE IS TEMPORARILY OUT OF PRODUCTION.


Оставьте свой отзыв (комментарий) или задайте вопрос:

Комментарии закрыты.